Wednesday, June 23, 2010

Merlin's Throne..... in progress

I wanted to try and give you all a better view of Merlin's Throne. This picture should pop up bigger if you poke it. If you recall the legends of Camelot, when Merlin was fed up with the world of men, he simply disappeared. Some say he was captured by the Lady of the Lake; in other stories, it is more voluntary. My friend wrote a story in which Merlin is brought back to modern times using his "Three Relics"....his staff, his cloak and his throne. Because Melin and his magic were based in nature, he wanted the throne to reflect that so he envisoned it almost made from a living tree. Since he is a CGI artist as well as a storyteller, he was able to draw that concept. I have been wanting to reproduce this in miniature for a while but wasn't sure how to start. I was also captivated by that tree bed and saw it again recently. So I just decided to do it and see what happened.

Sometimes, the hardest part is getting started. :-)

Here is where a ended up yesterday. After twisting the wire (like forever!) I attached the branches to the sides of the chair with brass spool wire. Then I coated everything with thinned white glue....I used Sobo (made by Delta) because I have a lot of it. It is a PVA type glue like Aleen's Tacky.

When the glue was dry, I applied the polymer clay. It stuck very well to the film of dried glue. I was working with a combination of ethnic brown Proscuplt and some old blue original Fimo, again, because I had it.


In my rush, I stuck it in the oven (which proved a bit of a problem itself since the piece, with branches, is taller than my oven), totally forgetting that it needed tree texture BEFORE baking. Duh!

So when it cooled, I applied yet more clay and textured. Below is a close up of the tree texture after the second round.

I wired in a few more branches and coated those with thick white glue (per the advice of our lovely Nikki) and that is pictured below.


Lastly is a full view of the back....while we're waiting for glue to dry.
Since I am unsure of the final position of the branches, I hesitated to cover them with clay because once baked, they will lose most of their flexibility. Painting over the heavily glued wire armature with a coat of artist acrylics would allow me to fuss a bit.

I think, for this chair, I am going to make the bird's nest on top and use it in the Alice Project as I have yet to decide on a chair for the Hatter. I have some ratty old green velvet and maybe I'll cover the back and seat. We'll see.

I also have another unfinished chair like this and will probably make another before I start on George's piece. I think Merlin's throne will require that I actually make the chair base ... and I need a little more practice making branches.

Later,

Tabitha



Tuesday, June 22, 2010

Moving on..... A new WIP

So....I'm glad that was sorted out....finally....hopefully....

Anyway, in an effort to bring some fresh air, I've decided to start a new project.

...and yes, the Alice Project is nearing completion but sometimes I just need to step away for a bit. I'll be photographing by the end of the week. Er....what I mean is, I'm going to get TG to use his fancy camera to photograph and see what happens. If luck holds, I'll unveil it on the weekend.

But on to the new project.

It is based on two things. First was a full-sized bed I initially saw in an online catalogue by Shawn Lovell Metalworks http://www.slmetalworks.com/beds_a.html.

Second is a CG chair that a friend of mine who is a digital artist designed.

Right now, I am experimenting with this chair. We'll just have to see where this goes......


Yes, Jayne....I know exactly what you mean about sore fingers and callouses! My plan is to cover the necessary parts of the chair with polymer clay to simulate the tree and the wire with either clay, modeling paste or maybe just many layers of paint.

I have already had it together and apart and then back together again...... I now understand what Edison meant when he said, "I haven't failed.....I've discovered many ways in which it won't work...."

Later...

Tabitha

....I'm sorry....I do not know why the pictures are not popping up bigger when you poke them. I have dome nothing different in posting....that i ma aware of anyway......

Sunday, June 20, 2010

Lord a Luvin'..I'm being stalked!!...

...and so are most of the rest of you, apparently.

I mean last night I actually thought it was just me and a few others....most probably as a result of the "confrontation" I had with this individual just a week ago.

But it seems not......oh deary me! How utterly obnoxious....not to mention irritating.

Because now I'm going to have to stop posting any WIP (something I have considered recently) because one never knows who is lurking about ready to snatch the idea, throw some piece of crap together , call it "done" and start selling it on Etsy. Never mind calling it their "own made up idea" and offering a "certificate of authenticity" to boot!

It was the bogus "certificate" the recently set me off and prompted my message to this charming stalker who promptly informed me that I had cast a shadow over their day.....pity, that. Yes, of course, said she, does it really matter who had the idea first? We all often have the same ideas. She has a solid, satisfied and ever-growing customer base and will continue providing them with these miniatures at a much lower cost....

Rubbish....

So not only does she make knock-offs; she makes cheap knock offs....... I can only surmise that she is trawling for new things to make as her own. Even more galling is the fact the she has a caveat on her website that all her "handmade" items are covered by copyright laws... (ok...now I'm gagging....)

Sigh....

I have discovered that the miniature world is rife with people who have no problem taking someone else's work, blatantly copying it and then selling it. I guess it is the selling it that really rags me. I do understand if someone thinks they can reproduce a piece either because they do not wish to (or cannot afford to) spend the money to purchase it from the artist.

Some even think they can do it better....well, Bravo! to them. As long as it is for their own private collection or to give to a friend, I have no real problem with them.

It is only when they start profitting (or attempting to profit) from another's work that I get ornery. WTF??? Don't they have an original idea in their head? There is so much to be inspired by.



I don't really make many magical miniatures so I guess I have little to be anxious about except for the fact that at any given moment, the tide could turn and another miniature genre will replace it. I have decided to keep my work under wraps until it is completed....not that it will make all that much difference....and to sell my work only at miniatures shows or privately. I will no longer be listing anything on Etsy.

Oy....it's always something!

Sadly,

Tabitha

ADDENDUM: Let me clarify that while I am being "followed" by a known plageriser, I have yet to experience the heartbreak of finding copies of my work for sale by someone else. This has been the sad experience of several of my dear friends however and since the individual in question has been bold enough to add her name to my "followers" list, I felt the need to speak out and to take steps to protect my work. That is all.....

Tuesday, June 15, 2010

Quilling Paper Pots?

Hi everyone! I am still working like madwoman on my Alice project which I PROMISE I will post pictures of soon...really....

In the meantime I have a question about a recent blog entry I read.

A week or so ago, I was scanning blogger and came across a post where the miniaturist was making plant pots out of quilling paper. I have done this before but what was different about hers was that she then coated with, I think, gesso to give them not only strength but texure. While I thought I bookmarked this interseting project, apparently I did not because now I cannot locate it again.

Does anyone follower a blogger with such project?? I know it sounds like a Casey project but I couldn't find it on her blog so I am at a loss. If anyone recalls it, could you please leave a comment?

Thanks,

Tabby

Sunday, May 16, 2010

Anyone familiar with this dollhouse?



Is anyone familiar with this dollhouse? It is called the "Canterbury" made by Norcraft. I cannot find any information on it but I was told the kit comes from England. The lady has 2 and is selling them for $25 each.

The descrition reads that it is pre-cut plywood. I am wondering if it is anything like the Duracraft or Geenleaf houses in terms of quality of wood or components because, if it is, I'll pass. I don't like working with those lits at all. Too flimsy and too much work to get everything to fit right.

Thanks,

Tabitha

Thursday, April 29, 2010

I feel like I have all but disappeared from Bloggervania. Though I have absolutely been keeping tabs on everyone's posts, mine have been absent. Mostly this is due to the strange disappearance of the download cord for the camera somewhere in the vast wasteland that is my husband's desk. But I cannot let him take all the blame because I have been up to my elbows in alligators since I returned from my trip.

I am working furiously on my exhibit for the July Lakeland show and replacing/creating new stock for the show. Little point in going if I have nothing to sell....

One of my side trips was to an amazing little fabric shop in Maitland, Florida....right smack in the middle of the state in what I always considered "nowhere". What a find!

These are the fabrics I bought...and believe me, I had to stop myself because my basket was full.



They are either 100% silk, 100% cotton or a silk/cotton blend, which I have NEVER seen before. There is even a bit of ultra suede. There all happened to be cut into "fat quaters" and I just kept filling my basket! The colors are so vibrant and just beautiful.

I also attended the three (yes three!!) miniature shows in the Chicago area in mid-April. First was the Three Blind Mice show which was small but had some really nice sellers. I bought a Robin Betterly kit which I will show when I finish it...lol...and lots of metal minis to be painted for various projects.

My best buy of that show, however, was this fabulous wicker wheelchair by Barb and Marvin Tate from Ohio. They do not appear to have a website. Marvin makes movable things like wheelchairs and prams; Barb makes stationary furniture. Marv has one of his wheelchiars in the miniature White House. This is a fabulous piece. I had never seen a miniature wicker wheelchair before. Furthermore, the price was very reasonable...under $100.


THE FLOOZIES ARE HERE! THE FLOOZIES ARE HERE!!
When I saw Jayne's Floozies, I knew I had to have a couple for my newest project and they arrived today. They are temporarily in a block of foam and Jayne was kind enough to enclose additional leaves for me to choose from. These are sooo cool. The photo does not do them justice.
Meet Rhianna (Miss Lips) and Frida.


Yet ANOTHER package came in the mail today! I was able to snag one of Kat Hazelton's newest steampunk creations which will go into the lastest project also. Sooo cool, Kat!



That's it for now. I have lots more things to show that I got at the shows and in the mail but I need to photograph them first. Hahaha....that's the worst part for me. I take such bad pictures.

.....another day....

Tabitha



Thursday, April 1, 2010

Packaging/shipping strategies.....or "How to put all your eggs in one basket without breaking any of them..."

I promised Nikki I'd let her know what was devised for shipping the orreries and I'm sharing it with all of you.

When my son was 13, the science class was issued a challenge: take a raw egg and drop it from the roof of the Administration Bldg without breaking. Surprisingly, (or perhaps not) his team was among the winners. The idea is to keep the egg from hitting the inside of the packaging AND to disperse the energy of the "fall" around it. They used lots of styrofoam, bubble wrap and duct tape.

This "experiment", along with looking at how my ceramic "Snow Village" is packaged, was the basis for our strategy.


See how the house is within a "cell" and, by means of the carved out areas, doesn't move within it? That is the plan. I had several pieces of the extruded polystyrene. You can use something that has been sent to you or it is available in sheets at the Home Improvement store. I believe it is used for insulation on new housing and comes in 2" and 1" sheets. I had it because I used it as a base for my Snow Village.....it makes nice "snow" and can easily be shaped with a hot tool/wire.

Below are the "hot" tools I used but anything like even a soldering iron or a very sharp knife can be used.


First I cut 2 pieces to the desired shape and siz and then made a "lid".


I measured the size of the object and cut out a hole in the center piece and a small bit out of the bottom to contain the object snugly. Then I stacked them.....at this point you could glue the two of them together.

Put the oject in the hole. I didn't show this but I put cut pieces of the small bubble wrap behind it as a cushion. The I put more of the cut up bubble wrap around and over it. Then comes the cover.


Tape the whole thing up and then put it in a sturdy cardboard box with more cushioning. And then mail.

Now to drop it off the Astromony Tower and see what happens. There is one other method I am going to try for items where the "sticking out things" (for lack of a better term) are so delicate that nothing should touch them at all. But that is for the next post....
And always work in a well ventilated area when using a hot wire because the polystyrene does emit fumes which, I am sure, are not good to breathe.


Tabitha